Advertisement
Glue the wheel wells into the wing using a compatible glue such as
"Zap-a-dap-a-goo", RC 56, or "Shoe-Goo".
Drill pilot holes for the retract assemblies.
With a pushrod attached to the retract assembly, move it into
position and mount to the hardwood blocks. Pushrods not provided.
Glue mounting blocks for the retract servo in the opening.
RETRACT INSTALLATION
Mount the retract servo and bend the pushrods as shown for
proper clearance.
Connect the pushrods to the retract servo arm with "Z" bends or
Install the wheels and check for proper operation.
9
"EZ" Connects.
Advertisement
