Advertisement
Quick Links
Advertisement
Related Manuals for Sylvania briteline led raptor
Summary of Contents for Sylvania briteline led raptor
- Page 1 Instructions Installation / Warranty Instructions...
-
Page 2: Product Specification
- Sylvania PRODUCT BRAND - Sylvania PRODUCT NAME / CODES - Sylvania Briteline LED Raptor – SR4H757A2 PRODUCT NAME / CODES - Sylvania Briteline LED Raptor – SR4H757A2 PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS EQUIPMENT. THE PRODUCT IS DESIGNED FOR INSTALLATION AND MAINTENANCE IN ACCORDANCE WITH... -
Page 3: Maintenance
Gerard Lighting Pty Ltd 96 - 112 Gow Street, Padstow, NSW 2211 Tel: 02 9794 930 www.gerardlighting.com.au Gerard Lighting Pty Ltd 96-112 Gow Street, Padstow, NSW 2211 T: 02 9794 9300 | www.gerardlighting.com.au be specifically validated in writing with the relevant brand before consideration. Product has been tested and compliant to AS/NZS60598.2.5:2002 Region C, Terrain Category 2 Wind Loading, for wind speeds up to 250Km/H at a mounting height of 20m, after such an occurrence the luminaire may require re aiming to original lighting design. - Page 4 Remove from carton Carton Weight 34kgs Lifting point indicated Page 4...
- Page 5 Gerard Lighting Pty Ltd 96 - 112 Gow Street, Padstow, NSW 2211 Tel: 02 9794 930 www.gerardlighting.com.au Fixture Dimensions For mounting use 2 x M16 Hex Bolts or 1 x M20 Hex Bolts 10° MAX 60° MAX. Page 5...
- Page 6 10¡ MAX 60¡ MAX. 1603 23º MAX. Aiming Point Torque to 10Nm Torque to 110Nm Aiming Point 19mm Hex Key Page 6...
-
Page 7: Module Identification
Gerard Lighting Pty Ltd 96 - 112 Gow Street, Padstow, NSW 2211 Tel: 02 9794 930 www.gerardlighting.com.au Module Identification Junction Box Junction Box Access Cover Access Page 7... - Page 8 Aiming There are 2 ways to set the correct aiming. When mounted on poles, it is recommend that for best accuracy the aiming is done after the poles and floodlights have been erected and have been allowed to settle into their installed position. Method 1 –...
- Page 9 Gerard Lighting Pty Ltd 96 - 112 Gow Street, Padstow, NSW 2211 Tel: 02 9794 930 www.gerardlighting.com.au Tighten the trunnion bracket mounting bolt to the required torque (by others) so that floodlight will no longer rotate. Tighten the trunnion bracket mounting bolt to the required torque (by others) so that The azimuth angle can be marked for future reference by marking a line in the cross floodlight will no longer rotate.
- Page 10 For example, a Raptor using an asymmetric Narrow Beam A2 reflector type (with a B=60° offset) that requires a tilt of 66 should have the glass tilted 66-60=6 . Tilts can be negative. ° Fig 2 Fig 3 Method 2 – with aiming device 1.
- Page 11 Gerard Lighting Pty Ltd 96 - 112 Gow Street, Padstow, NSW 2211 Tel: 02 9794 930 www.gerardlighting.com.au Note, an optional optical sight can be attached to the supplied sighting ring for longer throws (Fig 6). Fig 6 Aiming Point Put marker at 30deg Fig 4 Fig 5...
- Page 12 Sylvania is a brand of Gerard Lighting Pty Ltd...