Craftsman 320.39592 Operator's Manual page 12

,&
WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the sander from the power source when assembling
parts, making adjustments, installing or removing sandpaper, cleaning, or when
it is not in use.
TURNING THE SANDER ON/
OFF (Fig. 2}
To turn on the sander, connect
the plug to an electrical outlet,
and then depress the side of the
rocker switch marked "1".
To turn it off, depress the side of
the rocker switch marked "O". The
integrated pad brake will quickly
stop the spinning pad when the
sander is turned off.
LED WORKLIGNT (Fig. 3}
The LED worklight, located in the
front of the tool, will turn on when
the rocker switch is in the ON (I)
position. The LED worklight will
turn off when the switch is in the
OFF (O) position. This provides
additional lighting on the surface
of the workpiece for operation in
lower-light areas.
Fig. 2
On/Off
rocker
switch
Fig. 3
LED
worklight
12