Option2 Settings Menu; Setting The Power Management For Computer Images; Power/Standby Indicator; Setting The Picture To Suit The Movie - NEC PlasmaSync 50XM3 Model Information

Option2 Settings Menu

Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor's power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the and buttons to select "PWR. MGT.".
3. To turn the power management function on ...
Use the and buttons to select "ON".
The mode switches as follows each time the
button is pressed:
ON ↔ OFF
OPTION2
PREVIOUS PAGE
POWER MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
NEXT PAGE
SEL. ADJ.
Information
Power management function
* The power management function automatically reduces
the monitor's power consumption if the computer's
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer.
* If the computer's power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer's power
management function, refer to the computer's operating
instructions.
Power management settings
ON ........ In this mode the power management function
is turned on.
OFF ...... In this mode the power management function
is turned off.
Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See page E-28 for
indicator status and description.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or
2 / 3
: ON
: ON
: 3
: OFF
EXIT RETURN
E-28
3-97

POWER/STANDBY indicator

Power POWER/ Power
management STANDBY management
mode indicator operating status
On Green Not activated.
Off Red Activated.

Setting the picture to suit the movie

The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the "CINEMA MODE" to "OFF"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the and buttons to select "CINEMA MODE".
3. To set the CINEMA MODE to "OFF" ...
Use the and buttons to select "OFF".
The mode switches as follows each time the
button is pressed:
ON ↔ OFF
OPTION2
PREVIOUS PAGE
POWER MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
NEXT PAGE
SEL. ADJ.
Information
CINEMA MODE
ON ................... Automatic discrimination of the
image and projection in cinema mode.
OFF ................... Cinema mode does not function.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
CONFIDENTIAL
Description Turning the picture
back on
Horizontal and vertical Picture already on.
synchronizing signals
are present from the
computer.
Horizontal and/or Operate the keyboard or
vertical synchronizing mouse. The picture
signals are not sent reappears.
from the computer.
or
2 / 3
: OFF
: OFF
: 3
: OFF
EXIT RETURN