Parking System For Storage; Maintenance - Miele HS14 Operating Instructions Manual

Hide thumbs Also See for HS14:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
en
Parking system for storage (dia. 28 +
29)
,
Warning. Always disconnect the
vacuum cleaner from the electrical
supply when you have finished
using it. Switch the vacuum cleaner
off at the wall socket and unplug it.
^ Stand the vacuum cleaner upright
when it is not being used and when it
is being stored.
Retract the telescopic tube fully.
^ Then slot the floorhead downwards
into one of the parking attachments
on the side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
If your vacuum cleaner has an XXL
handle, you can detach this so that the
vacuum cleaner requires less storage
space.
^ Detach the XXL handle from the
retracted suction tube.
^ Wind the suction hose around the
suction tube and then slot the XXL
handle into the second parking
attachment.
38

Maintenance

,
Warning: Always disconnect the
vacuum cleaner from the electrical
supply for maintenance work and for
cleaning. Switch off at the wall so-
cket and unplug it.
The Miele filtration system consists of
three filters which must be replaced
from time to time to ensure that your
vacuum cleaner performs efficiently.
– Dustbag
– Dust compartment filter (for motor
protection)
– Exhaust filter
Only use genuine dustbags, filters,
accessories and optional
accessories with the "Original Miele"
logo on them. Only this will ensure
that the suction power of the
vacuum cleaner is maintained,
giving the best possible cleaning
results.
,
Warning: The use of dustbags
made from paper or paper-based
materials, or dustbags with a
cardboard collar, or dustbags that
do not carry the "Original Miele"
logo, can seriously damage the
vacuum cleaner and invalidate the
warranty.

Advertisement

Table of Contents
loading

Table of Contents