Oreck SF600 Owner's Manual page 15

Table of Contents

Advertisement

How to start the engine
Do not start the engine in a confined space or a place with insufficient ventilation.
Engine exhaust gas is odorless and contains carbon monoxide which can cause death.
Throttle lever
Starter grip
1. Put the speed change lever in the [N] position.
Move the fuel valve lever to the [ON] position
2.
To start a cold engine, move the choke lever to
3.
the [ CLOSED ] position.
If the engine has been warmed up,
there is no need to use the choke.
4. Turn the throttle lever between the [
positions
5. Grip the starter knob, pull slowly until you feel tension and
then pull strongly from this position.
Immediately after the engine has started, slowly return
the startknob to its original position.
6. If the choke lever to moved to the [CLOSED] position
to start the engine, gradually move it to the [OPEN] position
as the engine warms up
Please warm up the engine by leaving it engaged,
with the throttle in [ LOW ] for approximately 2 minutes.
] and [
]

Advertisement

Table of Contents
loading

Table of Contents