Unit Operation; Turning The Unit On; Turning The Unit On For The First Time - Technika DVDID-501 Owner's Manual

unit oPeration

TURNING THE UNIT ON

When the AC power cord is connected, press the
to turn it on. Press the FUNCTION button to select the desired mode (DTV,
TV, AV1, AV2/SCART or DVD).
on the screen.
Note: When the unit is not going to be used for a long time, disconnect
the AC power supply cord from AC outlet.

turninG tHe unit on for tHe firSt tiMe

• Make sure the RF aerial has been connected to the TV ANTENNA input on the rear of the TV.
• Make sure the CAM (Conditional Access Module) has been inserted into the CI (Common
Interface) slot correctly, if you are using a CAM.
The first time for you turn on the unit, initial setup menu will appear. You can simply follow the on
screen prompt to set up the system.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the ENTER/OK button to enter Auto Tuning menu.
3. Use the / button to select the Country you are in.
4. Use the button to move to Start. Press the ENTER/OK button confirm Start. The system will
automatically start to scan and preset all available programmes.
5. After scanning has finished, the TV will display the first programme stored.
If you select DVD, the DVD logo will appear
12
/ I button on the unit