Miele dgc 6805 Operating And Installation Instructions page 11


For safety reasons, this steam oven may only be used when it has
been built in. This is necessary to ensure that all electrical
components are shielded.

This steam oven must not be used in a non-stationary location
(e.g. on a ship).

Never open the casing of the appliance. Tampering with electrical
connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults.

While the appliance is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.

Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

If the plug is removed from the connection cable or if the cable is
supplied without a plug, the appliance must be connected to the
electrical supply by a suitably qualified electrician.

If the connection cable is damaged, it must be replaced with a
special connection cable type H 05 VV-F (PVC insulated). See
"Electrical connection".

During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.

If the steam oven is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the steam oven is in use.
Heat and moisture can build up behind a closed furniture panel and
cause subsequent damage to the steam oven, the housing unit and
the floor. Do not close the door until the steam oven has cooled
down completely.
Warning and Safety instructions
11