Set Up - Suunto VYPER NOVO User Manual

Icon
5
6
7
8
9
10

2.3 Set up

To get the most out of your Suunto Vyper Novo, take some time to
read this manual and familiarize yourself with the modes and
settings. Make absolutely sure you have it set up as you want
before getting into the water.
To get started:
1. Wake up the device by keeping any button pressed until the
display turns on.
2. Keep [DOWN] pressed to enter General Settings.
3. Set time. See
4. Set date. See
5. Set units. See
6. Press [MODE] to exit settings.
The default dive mode is Air. For more information on dive modes,
3.13 Dive modes .
see
Description
Tank pressure (if available)
Wireless transmission (if available)
Low battery
Active water contact
Diver attention symbol
Ascent rate
3.8.1 Time .
3.8.2 Date .
3.8.3 Units .
13