Fujitsu AOYG45LAT8 User Manual page 40

1-24. ECONOMY OPERATION
ECONOMY OPERATION functions by pressing ECONOMY button on the remote controller or
Home controller, it is almost the same operation as below settings.
( Table 20 : Detail of ECONOMY OPERATION)
Outdoor unit
Operation
limit current
mode
value
Cooling
Heating
*17.0A
Dry
Auto
During ECONOMY OPERATION,
*limit current value of outdoor unit is changed to 17.0A
When also "ENERGY SAVING PEAK CUT FUNCTION" mode is effective, the outdoor unit will operate
by lower current.
ECONOMY OPERATION does not operate in following conditions.
.
Compressor start-up process
.
Defrost operation
.
Oil recovery operation
.
Minimum heat operation
< Release conditions of ECONOMY OPERATION >
1, When the ECONOMY button on the remote controller is pressed.
2, When the indoor unit start-up by MANUAL AUTO button on the indoor unit.
(When the operation is stopped by MANUAL AUTO button, it is not released.)
Setting temperature
correction
Ts +1°C
Ts -1°C
Ts +1°C
Cooling : Ts +1°C
(When only fan mode,
Heating : Ts -1°C
air flow downs 1 step)
01-39
Indoor fan
Indoor unit LED
speed
OPERATION : Lighting
Normal
operation
ECONOMY : Lighting
Ts : Setting temperature
Wired remote
controller display
: Lighting
ECO