Sanyo PLC-EF30 Service Manual page 15

4.
Prism / LCD panel assembly removal.
Note :
Prism / LCD panel assembly is a precision part. be
sure to handle this part with special attention. Do
not drop it or give it excessive force. It may dam-
age the parts and alignment.
Remove 4 screws and remove the prism / LCD panel assembly.
At the time, be careful not to damage the prism / LCD panel assembly with the driver.
Never touch
the electrode of flexible cables.
Prism / LCD panel assembly.
-15-
Caution :
(1). Never touch the LCD panel and prism part directly with
hand. Otherwise the optical parts may get dirty.
(2). Since the LCD panel is equipped with CMOS-LSI, pay atten-
tion to static electricity.
And never touch the electrode of flexible cables.
(3). Don't disassemble prism / LCD panel assembly, otherwise it
can be damaged.