Sanyo PLC-EF30 Service Manual page 11

C
C C
C
B
B
A B
A
B
A
E
E
E
E
D
D
D
D
D
D
-11-
5.
Assembly Motor & audio, assembly Power, assembly
PFC, assembly Sub power and Fan(FN902)
Removal.
NOTE :
Be careful of the attachment direction of Fan.
FN902 is Fan for an exhaust.
1. Remove 3 screws A and remove the assembly motor & audio
2. Remove 4 screws B and remove the power holder.
3. Remove 4 screws C and remove the power holder top.
4. Remove 6 screws D and remove the assembly sub power.
5. Remove 4 screws E and remove the Fan (FN902).
6. Pull the assembly power upward and remove.
7. Pull the assembly PFC upward and remove.
6.
Optical unit removal.
Remove 12 screws and then pull the optical unit upward and
remove.
*
FN902 :
See the Production change
notice of the cover. (Page-1)