Instrument Panel - Ford 2013 EXPLORER Quick Reference Manual

Instrument Panel

4
3
2
1
1. PoWer tiLt/ 2. CrUiSe ControL:
teLeSCoPe
To set a cruise control speed:
Steering CoLUMn 1. Press the ON control up
*
and release.
Your power-tilt steering
2. Accelerate to the
column has a four-way rocker
desired speed.
control which allows you to
3. Press the SET control up
adjust the steering wheel to
and release, then take your
the desired position.
foot off the accelerator.
4
5
6 7
8
After your speed has been set,
you can press SET +/- to adjust
cruise speed. To disable, press
the OFF control down.
adaPtive
CrUiSe ControL
Allows you to set a 'gap distance'
between yourself and the vehicle in
front of you during highway driving.
When your cruise control is active,
press GAP up or down to select the
gap distance. Refer to the Cruise
Control chapter of your Owner's
Manual for more information.
note: Driving aids do not replace
the need to watch where the vehicle
is moving and brake where necessary.
Refer to your Owner's Manual for
safety information, more details
and limitations.
3. LeFt vehiCLe
inFo diSPLay
Provides information about various
systems on your vehicle. Use the
left-hand, 5-way controls located
on the steering wheel to choose
and confirm settings and messages.
Refer to the Information Displays
chapter in your Owner's Manual for
more information.
*
(if equipped)
4. ServiCe engine
Soon Light
*
Illuminates briefly when the
ignition is turned on. If it remains
on or is blinking after the engine is
started, the on-board diagnostics
system (OBD-II) has detected a
malfunction. Drive in a moderate
fashion and contact your authorized
dealer as soon as possible.
5. right vehiCLe
inFo diSPLay
*
Displays information about
Entertainment, Phone, Navigation
and Climate. Use the right-hand,
5-way controls located on your
steering wheel to scroll through,
highlight and make minor
adjustments within a selected
menu. Refer to the MyFord Touch
*
chapter in your Owner's Manual
for more information.
6. Steering WheeL
aUdio ControLS
*
Press VOL +/- to increase/decrease
volume levels. Press SEEK ∏ / π
to access the next/previous radio
station preset, CD track or preset
satellite radio channel .
*
Press to access SYNC
®
phone features.
Press to access
voice recognition.
7. PUSh bUtton Start
*
Allows you to start your vehicle by
pressing the ENGINE START/STOP
button while fully pressing down on
the brake pedal. Press the button
again to turn the engine off.
note:
Your intelligent access key
*
®
must be inside the vehicle for the
ignition to start.
8. hazard ControL
5