Headphone Volume - Panasonic Viera TX-32CR410 Operating Instructions Manual

Table of Contents

Advertisement

Sound
[Mode]
Sets your favourite sound mode. [Music] / [Speech] /
[User]
The selected mode affects all input signals.
[Music]  : Improves sound quality for watching music
videos, etc.
[Speech]  : Improves sound quality for watching news,
drama, etc.
  In [Music] and [Speech] modes, you can adjust the
[Bass] and [Treble] settings, and those settings will be
stored for each mode.
[User]: Adjusts the sounds manually by using the
equaliser.
– When you select [User] mode, [Equaliser] is active
instead of [Bass] and [Treble]. Select [Equaliser] and
adjust the frequency
[Bass]
Adjusts level to enhance or minimise lower, deeper
sound output.
[Treble]
Adjusts level to enhance or minimise sharper, higher
sound output.
[Equaliser]
Adjusts the frequency level to suit your favourite sound
quality.
This function is available when [Mode] is set to [User].
Select the frequency and change the frequency level
by using the cursor buttons.
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level
of the higher frequency.
To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers.

[Headphone Volume]

Adjusts the volume of headphones.
[Surround]
Surround sound settings. [Off] / [On]
[Auto Gain Control]
Automatically regulates large sound level differences
between channels and inputs. [Off] / [On]
[Volume Correction]
Adjusts the volume of individual channel or input mode.
14
(below).
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the
distance between the speakers and the wall.
[Over 30cm] / [Up to 30cm]
If the distance between the TV and wall is over 30 cm,
[Over 30cm] is recommended.
If the distance between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
[Preferred Audio 1 / 2]
Selects the first and second preferred language for DVB
multi audio (depending on the broadcaster).
[MPX]
Selects multiplex sound mode (if available).
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
For Analogue TV only.
[SPDIF Selection]
SPDIF: A standard audio file transfer format.
Selects the initial setting for digital audio output signal
from DIGITAL AUDIO and HDMI 2 (ARC function)
terminals. [Auto] / [PCM]
[Auto]: Dolby Digital Plus and Dolby Digital is output
as Dolby Digital Bitstream. HE-AAC and MPEG are
output as PCM.
[PCM]: Digital output signal is fixed to PCM.
Available in DVB mode and video contents of Media
Player.
[MPEG Optical Level]
Adjusts the audio level output from DIGITAL AUDIO
terminal as the initial setting.
[-12 / -10 / -8 / -6 / -4 / -2 / 0 dB]
Normally, PCM sound is higher comparing with the
other types of audio track.
[HDMI 1/2 Input(HDMI)]
Selects to fit the input signal (p. 20).
[Digital] / [Analogue]
[Digital]: When sound is carried via the HDMI cable
connection.
[Analogue]: When sound is not carried via the HDMI-
DVI adaptor cable connection.
For HDMI input only.
[SPDIF Delay]
Adjusts the time delay for the sound output from
DIGITAL AUDIO or HDMI 2 (ARC function) terminal if the
sound does not synchronise with the image. [0] / [10] /
[20 to 200] (msec)
[Downmix Mode]
Selects the output mode for listening to compressed
music. [Surround] / [Stereo] / [Dual1] / [Dual2]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents