Table of Contents
Advertisement
Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
treadmill, a VCR or DVD player to the audio/video input jacks, or a personal audio/video player to the
audio/video jack below the television on the console. Note: Use a CATV cable to connect to an external
source such as a cable box, satellite TV box, VCR, or analog cable. No CATV cable is included.
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the
75 ohm terminal on
the treadmill frame
near the power
cord.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the 75
ohm output jack on your VCR.
2. Plug in the power cord of your VCR. See your VCR
user's manual for proper grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm ter-
minal on the treadmill frame near the power cord.
75 Ohm CATV Cable
75 Ohm Terminal
HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK
1. Connect the three-
pronged end of the in-
cluded Audio/Video
Wire Harness (115) to
your DVD player or
VCR.
2. Plug in the power cord of your DVD player or VCR.
See your DVD player or VCR user's manual for
proper grounding instructions.
3. Connect the Audio/Video Wire Harness to the
audio/video input jack on the treadmill frame near
the power cord.
HOW TO CONNECT A PERSONAL AUDIO/VIDEO
PLAYER DIRECTLY TO THE CONSOLE
Locate the audio/video jack below the television on the
console, and plug it into a jack on your MP3 player, CD
player, or personal video player.
10
115
Advertisement
Table of Contents
