Pioneer PRS-D1200M Owner's Manual page 14

Connecting the Unit
Four Amplifier
1 Ω to 8 Ω
1 Ω to 8 Ω
1 Ω to 8 Ω
1 Ω to 8 Ω
• Use speakers having an impedance from 1 Ω to 8 Ω.
• The setting of the POWER MODE switch varies according to the speaker impedance. See the "Setting the
Unit" section for details. The same setting is used for four amplifiers.
13
MODE SELECT switch
must be in MASTER position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
Connect to a car stereo.
For details, see the
"Connection Diagram".
SYNC OUT
Connecting wire with RCA
pin plugs (sold separately).
SYNC OUT
Connecting wire with
SYNC IN
RCA pin plugs (sold
separately).
SYNC
OUT
SYNC IN
Connecting wire with RCA
pin plugs (sold separately).
SYNC IN