Technical Data; Declaration Of Conformity - Bosch GWS 1000 PROFESSIONAL Operating Instructions Manual

Intended Use
The machine is intended for cutting, roughing, and
brushing metal and stone materials without using
water.
For cutting metal, a special protection guard for cut-
ting (accessory) must be used.
For cutting stone, a special extraction hood for cutting
with cutting guide (accessory) must be used.
With approved sanding tools, the machine can be
used for sanding with sanding discs.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle

Technical Data

Angle Grinder
Article number
Rated power input
Output power
No-load speed
Grinding disc diameter, max.
Thread of grinder spindle
Reduced starting current
Constant electronic control
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 60745 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
04.12.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
1 609 929 K94 • 20.12.06
PROFESSIONAL
W
W
rpm
mm
kg
Dr. Eckerhard Strötgen
Head of Product
Certification
5 Grinder spindle
6 Extraction hood for sanding*
7 Mounting flange with O-ring
8 Carbide grinding head*
9 Clamping nut
10 Quick-clamping nut
11 Protection guard for sanding
12 Protection guard for cutting*
13 Grinding/cutting disc*
14 Hand guard*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Cutting guide with dust extraction protection
guard *
20 Diamond cutting disc*
*The accessories illustrated or described are not
included as standard delivery.
GWS 1000
PROFESSIONAL
3 601 H21 0.. 3 601 H21 0..
1000
630
11000
115
M 14
–
–
2.1
/II
Noise/Vibration Information
Measured values
EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Grinding surfaces (roughing): Vibrational emission
2
value a =8.5 m/s
h
Sanding with sanding discs: Vibrational emission
2
value a =3.4 m/s
h
*
GWS 1000
PROFESSIONAL
3 601 H24 0..
1000
630
11000
125
M 14
–
–
2.1
/II
determined according
, uncertainty K=2.0 m/s
, uncertainty K=2.0 m/s
GWS 1400
1400
820
11000
125
M 14
2.2
/II
to
2
.
2
.
English | 21