Hotel Mode Operation; Entry To Hotel Mode - Panasonic GP6DU Technical Manual

Hotel Mode Operation

Hotel Mode restricts certain operation functions for use in hotels

Entry to Hotel Mode

1. Enter the Service Mode using the method described previously.
Note: Leave the set tuned to cable channel 124, changing the channel may
inhibit access to the Hotel Mode EEPROM address.
2. Press the Power button on the remote control to display the service menu.
3. Press and hold the MUTE button on the remote
control for a few seconds. The display will change
from the standard serviceman mode setting to the
EEPROM address / data display.
4. Press the Channel Down button of the remote or
receiver to select the EEPROM ADDRESS 1584.
5. Press the Volume Up button of the remote or
receiver to set the data at EEPROM address to 01.
Data 01 allows access to Hotel Mode, Data 00
inhibits access to and disables Hotel Mode.
6. Push the Power button of the receiver or the
remote control to hide the Serviceman mode menu
Figure 57 - Service Man Menu
118
EEPROM Address /
Data Display