Mechanical Specification Options - Trane XR15 Product Data

Trane
www.trane.com
Mechanical
Specification Options
General
The 4TWR5 is fully charged from the
factory for up to 15 feet of piping. This
unit is designed to operate at outdoor
ambient temperatures as high as 115°F.
Cooling capacities are matched with
a wide selection of air handlers and
furnace coils that are AHRI certified. The
unit is certified to UL 1995. Exterior is
designed for outdoor application.
Casing
Unit casing is constructed of heavy
gauge, G90 galvanized steel and
painted with a weather-resistant powder
paint on all louvers, panels, prepaint
on all other panels. Corrosion and
weatherproof CMBP-G30 DuraTuff™
base.
Refrigerant Controls
Refrigeration system controls include
condenser fan and compressor
contactor. High and low pressure
controls are inherent to the compressor.
A factory installed liquid line drier is
standard.
Compressor
The Climatuff ® compressor features
internal over temperature and pressure
protection and total dipped hermetic
motor. Other features include: centrifugal
oil pump and low vibration and noise.
Trane has a policy of continuous product and product data improvement and it reserves the right to change
design and specifications without notice.
Condenser Coil
The outdoor coil provides low airflow
resistance and efficient heat transfer.
The coil is protected on all four sides by
louvered panels.
Low Ambient Cooling
As manufactured, this unit has a cooling
capability to 55°F. The addition of an
evaporator defrost control with TXV
permits low ambient cooling to 20° F.
Accessories
Thermostats — Cooling only and
heat/cooling (manual and automatic
changeover). Sub-base to match
thermostat and locking thermostat cover.
08/14