Table of Contents
Advertisement
Cell info display
• Select
On
to set the phone to indicate when it is used in a cellular network
based on Micro Cellular Network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in standby mode:
- a headset is connected.
- a loopset is connected.
Scroll to an enhancement folder and open the settings:
• Select
Default profile
when you connect a certain enhancement to your phone.
profile', p. 129.
• Select
Automatic answer
automatically after five seconds time. If the
once
or Silent, automatic answer cannot be used, and you must answer the
phone manually.
Note: If you are using a loopset, you need to activate it separately.If you
have activated a loopset, the headset will use the same settings as the loopset.
to select the profile you want to be activated each time
to set the phone to answer an incoming call
©
Copyright
2003 Nokia. All rights reserved.
See 'Changing the
Incoming call alert
is set to
Beep
123
Advertisement
Table of Contents
