Clearances Around Dnt2Mi - Nokia DNT2Mi sp/mp Operating Instructions Manual

5.3

Clearances around DNT2Mi

24 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
When installing DNT2Mi on a wall or freely on a horizontal level, you must
ensure that there is an adequate space for connecting cables. Recommended
clearances are shown in Figure 11.
In a modem-shelf installation, slot sizing of the shelf ensures adequate horizontal
clearances between the units.
Heat released from the unit is insignificant, and does not therefore set
requirements on the clearances around the equipment. DNT2Mi is cooled through
natural convection through air inlets and outlets located in the bottom and top of
it.
Caution
Do not cover DNT2Mi. The air inlets and outlets must be unobstructed to
maintain proper circulation of air.
Approx.
100 mm
Figure 11. Clearances around DNT2Mi
© Nokia Corporation
Nokia Proprietary and Confidential
Do not cover!
Approx. 440 mm
Approx.
100 mm
DN01145897
Issue 2-0 en