Nokia DNT2Mi sp/mp Operating Instructions Manual page 12

12 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
• G.704/2M
• EIA-530-A
• Ethernet
• VF
• D2048
Single-port and multiport versions
The single-port version offers one of the DTE interface types mentioned above,
whereas the multiport version can house up to three independent DTE interface
types. Additionally, the multiport version includes Time Division Multiplexing
(TDM), which allows dividing the transmission capacity over each DTE interface
according to application needs.
Power supply
DNT2Mi can be fed either with AC 90 to 264 V, DC -20 to -75 V, or remotely via
ACL2i through the line.
Management
DNT2Mi can be managed locally with the front panel keys, Nokia's hand-held
Service Terminal, or with a Microsoft Windows-based Macro Service Terminal
Emulator (MSTE) program running on a PC. For more information about
supported Windows operating systems, refer to the Macro Service Terminal
Emulator User's Manual.
DNT2Mi can also be managed remotely with Nokia's Network Management
System (NMS).
© Nokia Corporation
Nokia Proprietary and Confidential
DN01145897
Issue 2-0 en