Setting The User Bit - Canon LEGRIA HF G40 Instruction Manual

Setting the User Bit

The user bit display can be selected from the date or the time of recording, or an identification code
consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the
numbers 0 to 9 and the letters A to F. When you record a scene, the user bit will be recorded with it.
The user bit is also output from the HDMI terminal.
Operating modes:
1 Open the user bit [Setting] screen.
> >
[FUNC.] [MENU]
• To set the time for the user bit, select [
[ Date]. In such case, the rest of the procedure is not necessary.
• The user bit setting screen will appear with the orange selection frame on the leftmost digit.
• To reset the user bit to [00 00 00 00], touch [Reset] and then touch [X].
• Touch [Cancel] to close the screen without setting the user bit.
Í] or [Î
2 Touch [ ] to change the digit as necessary.
3 Touch another digit you want to change.
4 Change the rest of the digits in the same way.
5 Touch [OK] and then touch [X].
NOTES
• When playing back MP4 movies, the user bit embedded in the signal output from the HDMI terminal
will have a value of 0 and cannot be changed.
> >
[User Bit Type] [
Time] instead; to set the date for the user bit, select
Setting the User Bit
Setting]
75