Sony MDR-IF230RK Operating Instructions Manual page 5

b When connecting to your Discman's
headphones jack, connect the cord to the
transmitter's PHONES IN jack only.
Transmitter
to PHONES
IN jacks
Right channel
(red)
Unimatch
plug adaptor
(not supplied)
to a headphones
jack (stereo
phone jack)
2
Connect the transmitter to a power
source.
Transmitter
¥
LINE IN R PHONES IN L
DC IN 9V
to DC IN 9 V
jack
AC power adaptor (supplied)
¥
LINE IN R PHONES IN L
DC IN 9V
Left channel
(white)
Connecting
cord
(supplied)
to a headphones
jack (stereo mini
jack)
Discman,
WALKMAN*,
TV, VCR, etc.
to an AC
outlet
Notes
•Do not connect to the PHONES IN jacks and
LINE IN jack at the same time. If you do so, the
audio signals may be mixed.
•Use only the supplied AC power adaptor. Do
not use any other AC power adaptor.
•When you connect the connecting cord directly
to an earphone jack, the audio signal will not be
output through the right channel. In such a
case, use the separately sold PC-236HG plug
adaptor.
* WALKMAN is a registered trademark of Sony
Corporation.
Polarity of the plug
5