Sony XR-CA665EE Service Manual page 25

Pin No. Pin Name
90 LM_EJ
91 TAPEON
92 CM_ON
93 NOSESW
94
NS_MASK
95 DAVSS
96 to 99 NCO
100 DAVDD
I/O
Motor drive signal output to the loading motor drive "H" active
O
(For the eject direction and reverse side operation)
O Tape system power supply on/off control signal output terminal "H": power on Not used
O
Capstan/reel motor drive signal output terminal "H": motor on
Front panel block remove/attach detection signal input from the nose detection switch
I
"L": front panel is attached, "H": front panel is removed
O Discharge control signal output for the noise detection circuit Not used
—
Ground terminal (for D/A converter)
O Not used
—
Power supply terminal (+5V) (for D/A converter)
Description
XR-CA665EE
25