Capturing A Still Image In The Video During Playback - JVC GZ-HM670 Detailed User Manual

Editing
3 Tap "MENU".
Tap "PROTECT/CANCEL".
4
5 Tap on the files to protect or release protection of.
P appears on the selected files.
0
To remove P from a file, tap on the file again.
I and P are displayed on the files that are already protected.
0
To release protection of a file, tap on the file such that P is removed.
Tap "SEL ALL" to select all files.
0
Tap "REL ALL" to release all selections.
0
Still images that are recorded continuously within 2 seconds or with
0
the continuous shooting mode will be grouped together. Only the first
recorded file is shown and the group is displayed with a green frame.
When this is tapped, an index screen of the grouped files appears.
Tap on the files to protect or release protection of, then tap "J".
If the transfer mode of Eye-Fi Helper is set to "Selective Share" or
0
"Selective Transfer", M will be displayed.
Tap "SET" to complete the setting.
6
Protect marks I appear on the selected files.
0
Protect marks I disappear from the deselected files.
60
Capturing a Still Image in the Video during
Playback
You can capture still images of the scenes you like in the recorded videos.
1 Select video mode.
2
Tap L to select the playback mode.
3 Tap on the desired video.
4
Tap pause e at the desired scene during playback.
After pausing the video, you can fine-tune the point to capture by
0
tapping forward slow-motion k and reverse slow-motion l.
5 Capture a still image.
Memo :
Still images are captured with a size of 1920×1080.
0
Captured still images are stored in the media where the video is being
0
played back from.