Steam Functions - LG DLEX7700*E Owner's Manual

Steam Functions

LG's new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes and
reduce static, or sanitize clothes.
Simply select the Steam Fresh™ cycle or the Steam
Sanitary™ cycle. Or you can add a steam option to
selected cycles.
TM
Using the Steam Fresh
Steam Fresh™ uses the power of steam alone to quickly
reduce wrinkles and odors in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time. Steam Fresh™ can also be used to help reduce
odors and remove the hanger creases in fabrics.
NOTE
• Depending on the load size, change the cycle time
by pressing More Time or Less Time. The display
shows 1, 3, 5, or
select 5 for four or five items; and select
large load, a bulky item like a blanket, or to remove
hanger creases.
To use the Steam Fresh
1. Turn on the dryer and turn the cycle selector knob to
select the Steam Fresh ™ cycle.
2. To add an option function, select Wrinkle Care.
3. Depending on the load (quantity of items), steam
time can be changed by pressing the More Time or
Less Time buttons.
4. Press Start/Pause button to start the cycle.
Using the Steam Sanitary
The new Steam Sanitary
non-washable items quickly and easily using the power
of steam alone. This cycle is recommended for use
with cotton and polyester materials. (Do NOT use for
urethane foam, down feathers or delicate items.)
MFL67731058_en_150529.indd 37
cycle
. Select 3 for up to three items;
for a
TM
cycle:
TM
cycle
TM
cycle is ideal for sanitizing
Using the steam options:
The Reduce Static option injects steam late in the drying
cycle to reduce the static electricity caused by dry fabrics
rubbing together. Change the amount of time for the
cycle by pressing the More Time or Less Time button,
depending on the load (quantity of items). The display
will show the recommended number of items, such as 7,
9, 11, 14, 16, or 18.
TurboSteam™ helps prevent the overdrying of clothes
by injecting steam during the drying process. The
Steam Shield Function extends the life of clothes.
NOTE
• When Sensor Dry is selected with the Reduce Static
or Turbo Steam™ option, a Dry level of Less or Damp
cannot be selected.
• The Reduce Static option may also be selected
during Time Dry cycles.
• After the Steam option is selected in Time Dry, the
More Time or Less Time buttons will change the
steam time only.
• After pressing Start/Pause, the More Time or Less
Time buttons will be disabled.
To add steam to a standard cycle:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the steam option button for the steam option
you would like to add. Then adjust for the load size
using the More Time or Less Time buttons.
4. Press Start/Pause to start the cycle.
37
HOW TO uSE
2015.5.29 9:41:22 AM