Voice Commands; Digital Rights Management - Nokia N92 User Manual

Bluetooth connectivity to a headset is lost.
a compatible loopset is connected.
Select Headset, Loopset,
kit, and from the following:
Default profile
each time you connect a certain enhancement to your
device. See "Profiles — set tones"
Automatic answer
answer an incoming call automatically after 5 seconds. If
the ringing type is set to
answer is disabled.
Lights (for car kit only) — Set whether lights remain on, or
are switched off after the time-out.

Voice commands

You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see
To activate enhanced voice commands for starting
appications, press
device creates voice tags for the applications. To add more
applications to the list, select
application. To activate and create voice tags for profiles,
open the Profiles
114 Copyright © 2007 Nokia. All rights reserved.
Bluetooth handsfree, or
— Set the profile that you want activated
on page 94.
— Set whether you want the device to
Beep once or Silent, automatic
"Voice dialing"
, and select Tools > Voice
Voice cm. > Options
folder in Voice cm.
indicates To use enhanced voice commands, press and hold
the standby mode, and say a voice command. The voice
command is the name of the application or profile
Car
displayed in the list.
To add a second voice command that can be used to
startan application or profile, select
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select
Playback.
To change voice command settings, select
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select
recognition learning, for example, when the main user of
the device has changed, select

Digital rights management

on page 52.
Content owners may use different types of digital rights
management (DRM) technologies to protect their
cm.; the
intellectual property, including copyrights.This device uses
various types of DRM software to access DRM protected
> New
content. With this device you can access content protected
with OMA 1.0 and OMA 2.0. If certain DRM software fails
Options > Change
Options
Options
Synthesiser > Off. To reset voice
Reset voice adapts..
in
>
>