Parts Identification; Charging The Hair Clipper; Main Body; Blade - Panasonic ER1611 Operating Instructions Manual

Parts identification
 
 










A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status (
) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
 Stationary blade
 
 





C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9‑39)
; Power cord
 Appliance plug
G Cleaning brush
H Oil
 Charging stand
 Comb attachment shelves
 Charging plug
 Socket
Charging the hair clipper
Charge the clipper when recharge (
be used for approximately 5 minutes after the recharge (
blinks.
1
1 Connect the power
cord to the charging
stand.

2
2 Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
• Charge status (
• Charging is completed when Charge status (
blinks. (Max. 1 hour later)
• 1 full charge will provide approximately 50 minutes of
continuous operation.
) lamp starts to blink. It can
) lamp glows and charging starts.
) lamp
) lamp
3