Canon VIXIA HF20 Instruction Manual page 156

Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no fur-
ther scenes can be copied onto the memory card. Delete some scenes
(OJ
58) to free some
space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded in a different television system (PAL or SECAM).
Memory card cover is open
- After inserting a memory card, close the memory card slot cover
(OJ
42).
Memory card is full
- The memory card is full. Delete some recordings
(OJ
58, 94) to free some space or replace
the memory card.
Memory card is write-protected
- The LOCK switch on an SD or SDHC memory card is set to prevent accidental erasure. Change
the position of the LOCK switch
(OJ
164).
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch
(CD
164).
No memory card
- There is no memory card in the camcorder.
No photos
- There are no photos to play back.
No scenes
- There are no scenes in the memory selected.
- After selecting [Scene Search]
Q
[Scenes with Faces]: No scenes contain people's faces or
no scenes were recorded using the face detection function.
Not available in Dual Shot
- You pressed a button that cannot be used in
1:~.81
mode. Set the camera mode dial to -"
or CI to set the camcorder to flexible recording mode.
Number of scenes already at maximum
- The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes
(OJ
58) to free some space.
- The playlist can contain a maximum of 999 scenes.
Operation canceled
- The operation was canceled following user intervention.
156 •
Additional Information