S e t t i n g s
Security settings for wireless LAN access points
WEP security settings
Select
Menu
Tools
Settings
>
>
Options
> Edit.
In the access point settings, select
Wired equivalent privacy (WEP) encryption method encrypts data before it is transmitted. Access to the network is denied to
users who do not have the required WEP keys. When WEP security mode is in use, if your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an
Ad-hoc
network, all devices must use the same WEP key.
Select from the following:
WEP key in use
— Select the desired WEP key.
•
Authentication type
— Select
•
WEP key settings
— Edit the settings for the WEP key.
•
WEP key settings
Select
Menu
Tools
Settings
>
>
Options
> Edit.
In the access point settings, select
In an
Ad-hoc
network, all devices must use the same WEP key.
Select
WLAN security sett.
WEP encryption
— Select the desired WEP encryption key length.
•
WEP key format
— Select whether you want to enter the WEP key data in
•
WEP key
— Enter the WEP key data.
•
802.1x security settings
Select
Menu
Tools
Settings
>
>
Options
> Edit.
In the access point settings, select
802.1x
authenticates and authorizes devices to access a wireless network, and prevents access if the authorization process fails.
Select
WLAN security
sett.. and from the following:
WPA mode
— Select
EAP
•
EAP plug-in settings
— If you selected
•
access point.
Pre-shared key
— If you selected
•
wireless LAN to which you connect.
The settings available for editing may vary.
WPA security settings
Select
Menu
Tools
Settings
>
>
Options
> Edit.
In the access point settings, select
Select
WLAN security
sett.. and from the following:
WPA mode
— Select
EAP
•
EAP plug-in settings
— If you select
•
point.
Pre-shared key
— If you select
•
wireless LAN to which you connect.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol) plug-ins currently installed in your device (network service), select
Tools
Settings
Connection
>
>
LAN as a data bearer and
EAP plug-in
settings, and press the joystick.
EAP settings
Select
Menu
Tools
Settings
>
>
Options
> Edit.
Select
WLAN security mode
Select
WLAN security sett.
Copyright © 2006 Nokia. All Rights Reserved.
Connection
Access
>
>
WLAN security mode
Open
or Shared.
Connection
Access
>
>
WLAN security mode
WEP key settings
and from the following:
>
Connection
Access
>
>
WLAN security mode
(Extensible Authentication Protocol) or
WPA mode
WPA mode
Pre-shared
>
Connection
Access
>
>
WLAN security mode
(Extensible Authentication Protocol) or
WPA mode
> EAP, select which EAP plug-ins defined in your device to use with the access
WPA mode
Pre-shared
>
Access
points. Select
>
802.1x
or
WPA/WPA2
as their security mode. Select
Connection
Access
>
>
802.1x
or WPA/WPA2.
>
WPA mode
> EAP, scroll to
>
points. Select
Options
>
> WEP.
points. Select
Options
>
> WEP.
ASCII
points. Select
Options
>
> 802.1x.
Pre-shared key
> EAP, select which EAP plug-ins defined in your device to use with the
key, enter the shared private key that identifies your device to the
points. Select
Options
>
> WPA/WPA2.
Pre-shared key
key, enter the shared private key that identifies your device to the
Options
New access point
>
WLAN security sett.
points. Select
Options
>
EAP plug-in
settings, and press the joystick.
75
New access
point, or select an access point and
New access
point, or select an access point and
or
Hexadecimal
format.
New access
point, or select an access point and
(a secret key used for device identification).
New access
point, or select an access point and
(a secret key used for device identification).
and define an access point that uses wireless
WPA mode
>
New access
point, or select an access point and
Menu
>
> EAP, scroll to