Miele G 1143 SCi Operating Instructions Manual page 50

Problem solving guide
Problem
Dishes, cutlery
and glasses are
not dry or are
flecked.
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
Downloaded from DishWasher-Manual.com Manuals
50
Possible cause
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
You are using "2 in 1" or
"3 in 1" tablets, which do
not have a strong enough
drying performance.
The "2 in 1/3 in 1 Tab"
function (if present) is
switched on, even though
tablets are not being used.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
The salt reservoir cap has
not been screwed on
correctly.
An unsuitable "2 in 1" or
"3 in 1" tablet has been
used.
The water softener is
programmed to a setting
which is too low.
Remedy
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Leave it in for longer. See
"Operation".
Set the Tab function (if
present) to "Normal", and
replenish the rinse aid.
Set the Tab function (if
present) to the detergent
product being used (see "Tab
function").
Increase the dosage. See
"Before using for the first time".
Fill the salt reservoir. See
"Before using for the first time".
Replace it, making sure that it
screws back on correctly.
Change your detergent. Use a
standard liquid, tablet or
powder detergent, and refill
the salt and rinse aid
reservoirs in the dishwasher.
Select a higher water softener
setting. See "Before using for
the first time".