Before You Begin; Tools And Parts Needed; Parts Included; Appliance Dimensions - Bosch HCB5.651UC Installation Instruction

household installation. Thevoltageandfrequency of the
appliance mustmatchthe electrical i nstallation (see
ratingplate).
Theappliance complies withprotection class1 andmust
onlybe operated in conjunction witha protective
conductor t erminal.
An all-pole isolating switchwithat leasta 3 mmcontact
gapmustbefittedin theinstallation. Thismustremain
accessible afterinstallation.
Onlya qualified electrician whotakestheappropriate
regulations intoaccountmaylayor replacethe
connecting cable.
Followallvalidstandards andlaws.
Ensure thattheelectrical c onnection meetsthe
requirements o f the latestversion of allapplicable
standards andlawsin theappropriate c ountry, e specially
thefollowing standards: N ational Electrical Code,ANSI/
NFPA70*,or CSAStandards C22.1-94, Canadian
Electrical C ode,Part1 andC22.2No.0-M91**.
Havea qualified electrical t echnician checkthe
grounding ofthe appliance.
Do notgroundwitha gasline.
Nofuseprotection in the neutral o r grounding circuit.
Keepthe installation i nstructions. Onlyconnect t he
appliance witha copperconductor. I f possible, c onnect
theappliance to a metalcableguidedirectlyto thefuse
box.
Ensure thatthewirediameter meets the requirements o f
the latestversion of allapplicable standards andlawsin
theappropriate country, e specially thefollowing
standards: National E lectrical Code,ANSt/NFPA 70*,or
CSAStandards C 22.1-94, Canadian Electrical Code,Part
1 andC22.2No.0-M91**.
Puta protecting hosethatis listedinthe U.L.or C.S.A. o n
bothendsof theconnecting cable,thatis,on the
appliance andon thefusebox.
Forcopiesofthe standards listed,contact:
* National FireProtection A ssociation Batterymarch P ark
Quincy, M assachusetts 02269
** CSAInternational 8501 EastPleasant ValleyRoad
Cleveland, Ohio44131-5575
Before You Begin
Tools and Parts Needed
o Measuring tape
o Pencil
o Phillips screwdriver (Posidrive) #2
o Drill with the following bits: 5/16" (7.9 mm) and 3/8"
(9.5 mm)
o Spirit-level
o Aluminum tape (DO NOT use insulating tape)
o Exhaust channel (configuration depends on the
installation situation)
o Additional sheet metal screws (if necessary for
installation of the exhaust air duct)
o Saw
Parts Included
o Extractor hood with fan, back-pressure flap
o Lamp, already installed
o Metal grease filter
o Flue duct
o Drill template
o lx angle bracket for the flue duct
o Instruction manual and installation instructions
o 6x screws, 5x45 mm
o 8x screws, 4x8 mm
o 2x washers
o 2x hollow wall plugs, 8x40 mm
o 4x hollow wall plugs, 10x50 mm
o Torx adapter, 10 & 20
Appliance dimensions
103/4''
77/8 ''
(273 mm)_'_ (200 mm)
133/16"_
(335 mm)
<
(762 mm).
36"
(914 mm)
19_1/16 ' '
mm)
A
Only for circulating-air mode:
*Max. 45 13/16" (1164 mm)
*Min. 27 1/16" (687 mm)
Only for ducted operation:
*Max. 42 1/8" (1071 mm)
*Min. 27 1/16" (687 mm)
A