D-Link DCS-930L How To Connect page 7

10. Now type in your correct wireless password into the Pre-Shared Key field, then press the Save Settings
button:
11. Now remove the Ethernet cable from the DCS-932L.
NOTE: When you disconnect the Ethernet cable the power LED will turn red, then come green again within
a few seconds.
12. Now after 30 seconds click on Maintenance > System and click the Reboot the Device button:
12. When the DCS-930L has completed the reboot process you will know that your connected wirelessly as
you should also be able to click on the other menu's in the DCS-930L Web Configuration and when viewing
the Live Video menu, moving objects should also be visible in the DCS-930L Web Configuration without
needing an Ethernet cable connected.
D-Link Technical Support – How to connect the DCS-932L wirelessly. Page 7 of 7