Nokia 9210i User Manual page 160

To set up WAP connections
Note: Before you can use the WAP services, you need to configure your WAP
settings. Your WAP service provider will provide you with the exact
values for the WAP settings. Follow the instructions carefully. You can
use this information to define and edit the settings manually.
Furthermore, your service provider may be able to send some, or all, of
the required settings to you via a special short message, an Over The Air
(OTA) message. After you have received the settings, you can start using
the WAP application or edit the settings as described below.
To define and edit WAP connections
1 Press the Menu key and select Tools > WAP access. A dialog opens.
2 Press New to create a new connection, and Edit to edit an existing connection.
A dialog opens. See Figure 64.
Figure 64
3 Press Close when you are ready.
Name: Name of the connection. All your connections should have different
names. You can define each name freely.
Tip: The shortcut to
define and edit WAP access
points is Ctrl + Shift + X.
Copyright © 2000-2003 Nokia. All rights reserved.
153