System; System Settings - Nokia 9110 User Manual

12. System

System contains the following applications: Security, User data, Memory,
Infrared activation, Digital camera connectivity, Remote synchronisation, Fax
modem, Data removal, Install/Remove software, Backup/Restore, Memory
card tool, and About this product.
To start a System application
1 Press the System application button.
2 Scroll to the application and press Select.
3 If a System application is active, you must close it by pressing Close in the
main view of the application before you can start another.
Note: When one of the PC connectivity applications
or the fax modem is in use, the communicator
consumes more power than normally. To extend the
battery operation time, these applications should be
closed when they are not used.

System settings

To change the System settings
1 Press Settings in the System main view.
2 Select the setting you want to change.
3 Press Change.
The System settings include all system-related permanent settings:
System sounds — Covers all the sounds in the communicator. The available
settings are:
Default ringing tone — You can select one of the tones in the pop-up box
or compose a special ringing tone for your telephone with the Composer
application. See "Composer" on page 141. You can also use the sounds you
have recorded with the Digital voice recorder as ringing tones. See "Voice
recorder" on page 144. If a tone or sound is erased, the default ringing tone
Grande valse will replace it.
Alternate ringing tone — If your SIM card supports the alternate line
service, you can select a different ringing tone for Line 2. See "Telephone
settings" on page 65.
1999 Nokia Mobile Phones. All Rights Reserved.
125