Craig CVD512a Owner's Manual page 15

Video Setup Page:
1. If Output Mode is selected, using the Direction and ENTER Buttons to set it to CVBS or YUV
as the connection of TV.
~ Set to CVBS if you connected TV through the Video/Audio Output Jacks as page 9.
~ Set to YUV if you connected TV through the Y; Pb/Cb and Pr/Cr Jacks.
2. If TV Mode is selected, using the Direction and ENTER Buttons to set it to
or Interlace to match the system of the connected TV through the Y; Pb/Cb and Pr/Cr Jacks.
(We recommend set to P-Scan for better picture quality if your TV supported).
Preference Setup Page:
1. If TV Type is selected, using the Di
(Note: The TV system in US, Canada and Mexico is NTSC).
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER Buttons to set the priority
of the available language.
3. If Parental is selected, using the Direction and ENTER Buttons to set the rating level as desire as follow:
Press the ►
~
Button to enter, the rating level list will highlight.
Press the ▲ or ▼
~
~ Press the ENTER Button to enter, password enter window will pop up.
~ Enter the four digit password ( default password is 5120 ) by pressing the Numeric Buttons.
~ Press the ENTER Button to save the settings and exit.
~ Rate levels:
1. kid saf: Kid safe
2. G: All ages
3. PG: Parental Guidance
4. PG13: Parental Guidance less than 13 years old
5. PGR: Under 17 years old, Parental Guidance suggested
6. R: Under 17 years old, Parental Guidance strongly
7. NC17: 17 years old or above
8. Adult: Adult only
4. If Password is selected, press the ENTER Button to enter, the sub setting
~ If Password Mode is selected, using the Direction and ENTER Buttons
rating level setting) or
~ If Password is selected, press the ENTER Button twice to enter. The
will appear.
Enter the four digit old password.
Enter new four digit password. The Column of Confirm Pwd will be hightlighted.
Enter the new password again. OK Button
the ENTER Button to save the setting and exit.
Press
5. If Default is selected, using the Direction and ENTER Buttons to reset all
press the SETUP Button to exit without changes.
SYSTEM SETUP
rection and ENTER Buttons to set to
( Function depends the recording of
Button to select the desired level as below.
Off (Password is needed).
The Colum of New Password will be highlighted.
on the screen
P-Scan (Progressive Scan)
PAL, AUTO or NTSC.
DVD).
menu will appear.
to set it On (activate the
New password setting menu
will be highlighted.
setting to default setting or
-14-