System Setup - Craig CVD512a Owner's Manual

Setting Menus:
In stop playback mode, press the SETUP Button, the setting menu will appear on the screen as below. Using the Direction
Buttons to select and hightlight the function you need to set or reset. Press the ENTER Button to enter or confirm the selection.
After setting, press the SETUP Button to save the settings and exit.
General
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
Go To General Setup Page
General Setup Page:
1. If TV Display is selected, using the Direction and ENTER Buttons to set the aspect ratio to
Normal/PS (4:3); Normal/LB (4:3 Letter Box) or Wide (16:9) to
2. If Angle Mark is selected, using the Direction and ENTER Buttons to set it
multi-angles are available in the playing DVD,
3. If OSD Lang (On Screen Display Language) is selected, using the
OSD language to English; French or Spanish
If Screen Saver is selected, using the Direction and ENTER Buttons to set it On or Off.
4.
If set to On, the screen saver will come on when the unit stops or the image is paused for approximately five minutes.
5. If Last Memory is selected, using the Direction and ENTER Buttons to set it On or Off.
same disc. The unit
Spea k er Setup Page:
1. If Downmix is selected, using the Direction and ENTER Buttons to set it to LT/RT or Stereo.
~ If set to LT/RT, the rear left or rear right channels in Dolby 5.1 recording DVD will plays on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will plays on Right Speaker.
Note: Function depends on the recording of disc.
Dolby Setup Page:
1. If Dual Mono is selected, using the Di
channel on all speakers), R-Mono (Play Right
Left channel then plays on all speakers) as desire. (Functions depend on the recording of the disc).
2. If Dynamic is selected, using the Di
turn it off.

SYSTEM SETUP

Audio
General Setup Page
Wide
On
ENG
On
On
the multi-angle logo
as desired.
will start playback from the position where the disc was stopped last time.
rection and ENTER Buttons to set it
channel on all speakers) or Mix-Mono
rection and ENTER Buttons to set the
Dolby Video
Preference
mtach the connected
On or Off. If set to On, when
will appear on the screen.
Direction
to Stereo, L-Mono (Play Left
dynamic level as desire or
-13-
TV.
and ENTER Buttons to set the
If set to On, when replays the same
(Mixed Right and
◄, ►, ▲, ▼