GoPro Hero 2 User Manual page 15

/ Capturing Photos
To Capture Burst Photos:
1. Press the Info/Wireless button to turn on the camera status screen.
2. Be sure the photo capture mode is set to Burst:
a. Press the Info/Wireless button repeatedly to cycle to Camera
Settings, then press the Shutter/Select button [
b. Press the Shutter/Select button [
to the Photo icon [ ].
c. Press the Info/Wireless button to highlight the photo capture
mode (Single or Burst).
d. If the capture mode is Single, press the Shutter/Select button
[ ] to change it to Burst.
28
] to select it.
] repeatedly until you get
e. Press the Info/Wireless button repeatedly to cycle to Done,
then press the Shutter/Select button [
3. Press the Info/Wireless button to cycle to Enter Photo Mode, then
press the Shutter/Select button [
4. Press the Shutter/Select button [
then beeps once after each photo is captured. The camera status
lights blink while the camera is capturing photos.
5. To exit Photo Mode, press the Info/Wireless button to cycle to
Exit Photo Mode, then press the Shutter/Select button [
select it.
/ Capturing Photos
] to select it.
] to select it.
]. Your camera beeps once,
] to
29