GoPro Hero 2 User Manual page 12

/ Capturing Video
To Capture Looping Video:
1. Connect your camera to the GoPro App for mobile or a GoPro remote.
For details, see Accessing All Modes and Settings
2. Select Video mode [
] from the app or the remote.
3. Select Looping Video.
4. Tap the record button on the app, or press the Shutter/Select
button [ ] on the remote or the camera. The camera beeps once
and the camera status lights flash while the camera is recording.
5. To stop capturing, tap the Record button on the app, or press the
Shutter/Select button [
] on the remote or the camera. The
camera status lights flash three times and the camera beeps
multiple times.
22
(page 32).
Note: When your camera is connected to the app or remote, it remains in standby mode after
capturing video or photos. If you want to power off the camera, tap the Power button on the app or
press the Power/Mode button on the remote. Wireless remains on so your camera is still connected
to the app or the remote.
PRO TIP: Videos captured at lower resolutions such as 720p30 fps are
supported by more mobile devices and are easier to share and upload
to the web.
/ Capturing Video
23