Candy CRU 160 E Instruction Manual page 7

4.Apply blanking covers (B) as
indicated.
5. Separate parts A,B,C,D as shown
in the figure.
6. Place guide (A) on the side part of
the furniture door, up and down as
shown in the figure and mark the
position of external holes. After
having drilled holes, fix the guide
with the screws supplied.
7. Fix cover ( C ) on guide (A) until it
clips into place.
8. Open the appliance door and the
furniture door at 90 .Insert the
small square (B) into guide (A) .Push
together the appliance door and the
furniture door and mark the holes as
indicated in the figure remove the
squares and drill holes with
at 8 mm from the outer edge of the
door . Place the small square on the
guide again and fix it with the screws
supplied.
6
2 mm