Switch The Device On And Off; Antenna Locations; Configuration Settings - Nokia 6710 Navigator User Manual

Switch the device on and off

Press and hold the power key to
switch the device on and off. Briefly
pressing this key ends an active call
or closes an application.
If the device asks for a PIN code,
enter the PIN code, and select OK.
If the device asks for the lock code,
enter the lock code, and select OK.
The factory setting for the lock code
is 12345.
To set the correct time zone, time,
and date, select the country you are
presently in, then enter the local
time and date.

Antenna locations

Your device may have internal and external antennas. Avoid
touching the antenna area unnecessarily while the antenna
is transmitting or receiving. Contact with antennas affects the
communication quality and may cause a higher power level
during operation and may reduce the battery life.
© 2009 Nokia. All rights reserved.
During extended operation such as an active
video call and high speed data connection,
the device may feel warm. In most cases, this
condition is normal. If you suspect the device
is not working properly, take it to the nearest
authorised service facility.

Configuration settings

Before you can use multimedia messaging, e-mail,
synchronisation, streaming, and the browser, you must have
the proper configuration settings in your device. Your device
may automatically configure browser, multimedia
messaging, access point, and streaming settings based on
the SIM card used. If not, you can use the Settings wizard
application to configure the settings. You may receive the
settings as a configuration message that you can save to your
device. For more information on availability, contact your
service provider or nearest authorised Nokia dealer.
When you receive a configuration message, and the settings
are not automatically saved and activated,
is displayed. To save the settings, select
Save. You may need to enter a PIN code provided by the
service provider.
1 new message
Show Options
> >
11