Replacing The Palm Rest; Procedure; Post-Requisites - Dell Inspiron 14 3000 Series Service Manual

Replacing the palm rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Replace the speakers.
2 Replace the power-button
3 Replace the touch
4 Slide the speaker cable through the slot on the computer base.
5 Align the screw holes on the palm-rest assembly with the screw holes on
the computer base.
6 Replace the screws that secure the palm-rest assembly to the computer
base.
7 Slide the touch-pad cable and the power-button cable into the system
board and close the latches to secure the cables.
8 Close the display and turn the computer over.
9 Replace the screws that secure the palm-rest assembly to the computer
base.
10 Connect the speaker cable to the system board.
11 Turn the computer over and open the display.

Post-requisites

1 Replace the keyboard.
2 Follow the procedure from step 4 to step 6 in
3 Replace the base
4 Replace the battery.
38
computer. After working inside your
board.
pad.
cover.
After working inside your
"Replacing the hard drive".