Using Your Steam Mop - Shark S3901 GEL Owner's Manual

Using Your Steam Mop

IMPORTANT: Make sure you do not use the mop
without attaching a cleaning pocket and adding water
to the tank first. When you are using the mop for the
first time, it might take longer than the normal 30
seconds to start steaming.
NOTE: Sweep or vacuum your floors prior to cleaning
with your Steam Mop.
fig. 7
1
2
fig. 8
Pull and twist the quick release cord holder to
unwrap the power cord completely. Plug into an
electrical outlet. (fig. 7)
The ON/STEAM SETTING button will flash
blue. If the light does not turn on, reference the
troubleshooting section on page 20. (fig. 8)
www.lakeland.co.uk 8
E