Attaching Or Removing Battery Pack - Panasonic EY4550 Operating Instructions Manual

Blowing lever
Select dust blow mode.
: OFF : ON
Dust adapter for vacuum cleaner
(EY9X016) (Available as an accessory,
not included)
You can use a vacuum cleaner to
collect cutting dust while cutting.
Installation
1. Attach the hook of the dust collection
adapter to the front of the base.
2. Snap the rear to install it.
3. Attach the hose of the vacuum cleaner.
• It is recommended to use a dust adapter
for reducing the risk of damaging the
surface of the object being cut.
Attaching or Removing Battery
Pack
1. To connect the battery pack:
Line up the alignment marks and attach
the battery pack.
• Slide the battery pack until it locks
into position.
2. To remove the battery pack:
Pull the button from the front to
release the battery pack.
- 13 -
Alignment
marks
Button