Call Settings - Nokia 6230 Extended User Manual

• Select Active access point
• Select Edit active access point
• Select Alias for access
press OK.
• Select GPRS access
(E)GPRS network and press OK. Contact your network operator or service provider for the APN.
You can also set the (E)GPRS dial-up service settings (Access Point Name) on your PC using the Nokia
Modem Options software, see PC Suite on page 156. If you have set the settings both on your PC and
on your phone, note that the PC's settings will be used.

Call settings

Press Menu, and select
• Call divert (network service). With call divert, you can direct your incoming calls to another number,
for example, to your voice mailbox number. For details, contact your service provider. Divert options
not supported by your SIM card or your network operator may not be shown.
Select the divert option you want, for example, select
number is busy or when you reject an incoming call.
To set the divert setting to on, select
diverted, if this is available for the divert option. To set the divert setting to off, select Cancel, or
select Check status, if this is available for the divert option, to check whether call divert is activated
or not. Several divert options may be active at the same time.
To see the divert indicators in standby mode, see Standby mode on page 28.
and activate the access point you want to use.
to change the access point settings.
point. Key in the name you would like for the activated access point and
point. Key in the Access Point Name (APN) to establish a connection to a
Settings and Call settings. Select
Activate
Divert if busy
and then select the timeout after which the call is
Copyright © 2004 Nokia. All rights reserved.
to divert voice calls when your
106