Table of Contents
Advertisement
TUNER
™ The system will search for every
™ All available radio stations will be
™ The system will stop searching when
™ The system will remain tuned to the
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
STOP•CLEAR Ç (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press PROGRAM for less than one
second.
™ The
™ The next available preset number will
16
Untitled-13
Downloaded From Disc-Player.com Philips Manuals
4 Press TUNING à or á to tune to the
available station in the FM waveband
desired frequency.
first, then search by the MW and LW
• If you wish to store the radio station to
wavebands.
another preset number, press PRESET
4 or 3 to select the desired preset
stored automatically. The frequency
number.
and preset number will be displayed
5 Press PROGRAM again.
briefly.
™ The
PROGRAM
radio station will be stored.
all the available radio stations are
• Repeat the steps 3 to 5 to store other
stored or when the memory for 40
preset radio stations.
preset radio stations is used.
Notes:
– When 40 radio stations are stored and
last stored preset radio station.
you attempt to store another radio
station, the display will show" FULL ".
If you want to change an existing preset
number, repeat steps 3 – 5.
– You can cancel manual programming by
pressing STOP•CLEAR Ç (on the
system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press PRESET 4 or 3 to select the
desired preset number.
™ The preset number, radio frequency,
and waveband appear on the display.
flag starts flashing.
PROGRAM
be displayed for selection.
16
Receiving RDS Radio Station
Ç
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
flag disappears and the
• STATION NAME: The radio station
name is displayed.
• FREQUENCY: The frequency of the
radio station is displayed.
• PROGRAM TYPE: The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
• RADIO TEXT (RT): text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (Ç) and the radio station name
will appear on the display:
• The display normally shows the radio
station name if available.
By repeatedly pressing RDS button you
can change the type of display
information:
™ The display shows in turn:
STATION NAME ™
PROGRAM TYPE ™ RADIO
TEXT ™ FREQUENCY ™
STATION NAME ...
6/15/00, 1:15 PM
Note:
– When you press the RDS button and the
display shows " NO RDS ", it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1 Press CLOCK/TIMER.
™ "--:--" or current time appears on
the display.
2 Press CLOCK/TIMER once more to
enter clock setting mode.
™ "00:00" or current time starts
flashing.
3 Press RDS.
™ The message "SEARCH RDS
TIME" will be displayed.
™ If the station does not transmit RDS
clock, "NO RDS TIME" will be
displayed.
™ When the RDS clock is read, "RDS
TIME" will be displayed. The
current clock time is displayed for 2
seconds and will be stored
automatically.
™ If within 90 seconds, the RDS time is
not detected, "NO RDS TIME"
will be displayed.
3139 116 18533
Advertisement
Table of Contents
