Table of Contents
Advertisement
Section 3 - Configuration
This section will allow you to change the local network settings of the DHP-W312AV and to configure the DHCP settings.
Device Name:
Enter the Device Name for the DHP-W312AV.
You will use this name to connect to it
through a web browser. The default name
is listed on your Wi-Fi Configuration Card.
LAN Settings:
Use the drop-down menu to select Dynamic
IP (DHCP) to automatically obtain an IP
address on the LAN/private network. For
Static IP setup, see the next page.
IPv6 Connection
Your Internet Service Provider (ISP) may
Type:
require this to be set a certain way for
Internet access. Contact your ISP regarding
such requirements.
LAN IPv6 Address
This shows the current IPv6 address of the
Settings:
DHP-W312AV on your network.
Save Settings:
Click Save Settings to save and activate the
new changes.
D-Link DHP-W313AV User Manual
Network Settings
19
Advertisement
Table of Contents
