TP-Link AP500 User Manual page 22

Chapter 4
¾ Repeater/Bridge Mode
If Repeater/Bridge mode is selected, please take the following steps:
1 ) Select the wireless network
for demostration.
2 ) Enter the exact same wireless settings of the Host network that you want to
connect to. Or click
Once a network is selected, its SSID, MAC address and security settings (except
the password) will be automatically filled in the respective fields. If the selected
network is protected, enter the password.
3 ) Click Save to save the settings.
4 ) Select the wireless network
settings. Here we take
5 ) The wireless radio is enabled by default. Customize the
(SSID) and Security
WPA/WPA2 - Personal, WPA/WPA2 - Enterprise and WEP. The default WPA/WPA2
- Personal is recommended. Enter a
access to your AP device.
2.4GHz or 5GHz
Wireless Scanner and choose a Host network from the list.
2.4GHz or 5GHz
2.4GHz for demostration.
settings. The AP device provides four security options, None,
Password
to connect. Here we take
to configure the extended wireless
Wireless Network Name
below to prevent unauthorized
2.4GHz
19