TP-Link AP500 User Manual page 21

Chapter 4
1 ) Select the wireless network
demostration.
2 ) The wireless radio is enabled by default. Customize the
(SSID) and Security
WPA/WPA2 - Personal, WPA/WPA2 - Enterprise and WEP. The default WPA/WPA2
- Personal is recommended. Enter a
access to your AP device.
Note:
1. It is recommended to keep the default settings for other parameters. If it is necessary to change the related
parameters, please refer to the help page.
2. Tick Hide SSID if you want to hide this wireless network name.
3 ) Click Save to save all your settings.
In addition
• Mode - Select the transmission mode for your wireless client devices,
mixed, 802.11g/n mixed
802.11n/ac mixed
default settings.
• Channel Width
for 2.4GHz and 80MHz,
• Channel/Frequency
default channel is Auto, which finds the best channel available automatically. It
is recommended to leave the channel to
intermittent wireless connection issue.
2.4GHz
settings. The AP device provides four security options, None,
or 802.11n only
or 802.11ac only
- Select a channel width for the wireless network,
40MHz or 20MHz
- Select an operating channel for the wireless network. The
or 5GHz. Here we take
Wireless Network Name
Password below to prevent unauthorized
for 2.4GHz and
for 5GHz. It is recommended to keep the
for 5GHz.
Auto if you are not experiencing the
2.4GHz for
802.11b/g/n
802.11a/n/ac mixed,
40MHz or 20MHz
18